Update the Vector Vario
We continuously improve the software embedded in Vector Vario by adding features, refining existing functions and fixing issues. We strongly recommend that you keep your Vector Vario up to date for the best performance.
How are software versions numbered?
Software identifiers such as v1.32c follow a major.minor(test) pattern:
- The first number marks a major release with substantial changes, for example v1.00 followed by v2.00.
- The second number marks a minor release containing improvements or new features, for example v1.00, v1.01 and v1.02.
- A trailing letter identifies a test or beta build released before the final version, for example v1.32b, then v1.32c, before v1.32.
Where can I find the software version on my Vector Vario?
From Vector Vario Configurator
- Connect your Vector Vario to Configurator.
- Open Additional Settings → Connected Device Information → Firmware Version.
From the config.vv file
- Switch the vario off.
- Remove the microSD card and read it from a computer, tablet or smartphone.
- Open
config.vvand locate theFirmwareVersionline.
From an IGC file
- Open an IGC file created by your vario in a text editor.
- Locate the
HFRFWFIRMWAREVERSIONline.
How do I update my Vector Vario?
Via Bluetooth (BLE)
- Connect your Vector Vario to the Configurator.
- When a newer stable version is available online, Configurator offers to open the update window.
- The same notification appears for beta users when a newer beta or stable version is available.
- You can also open it manually from Additional Settings → Connected Device Information → Firmware Version → Change Firmware.
- Select the version you want to install.
- Choose Start. The file is transferred first (blue LED, under two minutes), then installed (purple LED, under ten seconds).
Via the microSD card
- Download a file from “Update files” below.
- Copy it, without renaming it, to the root of the microSD card.
- Insert the card while Vector Vario is off, then switch it on.
- The update runs automatically (purple LED, under ten seconds) and the vario powers off.
- Switch it on again and check the installed version.
Notes
- You may install an older version than the one currently installed.
- Older releases remain available while they are compatible with Configurator.
- Offline BLE updates are possible: choose “Other”, select a local update file and continue the normal process.
Update files (manual download)
- vv.update.1.32
SHA256 · 6ac1d78835909d7b3ca5d210739611866ac29949e1598687decd611363e11efb - vv.update.1.33
SHA256 · 3647a477cc720f3d15a0572a517e23bcfc39c37d2bf82a9a90f6ddc8aa35ebbd - vv.update.2.00
SHA256 · 3536471f7b1ce8911fdf51c1b790f8d7692f8e68dcbc26f0c8c46a6f07e8ecf2 - vv.update.2.01g
SHA256 · 522916f6aa52a030f15183ba9f706473f20e7d43fd887de42eb81e93d02f17be - vv.update.2.01
SHA256 · 254458e6828d3a2b7cf39f022020f2e6aa6dd017078a56752baa543aba7681c7
Version history
Vector Vario v2.02b 29/10/2026
- Improved GPS configuration for recent models.
- Improved battery life.
- Experimental: wind calculation quality indicator, available on XOTD 4 in place of dTdew (removed).
- Vector Vario Pro: higher GPS update rate and a second attitude calculation for manoeuvres outside the flight envelope.
Vector Vario v2.01 23/08/2026
- Validation of the additions introduced in v2.01g.
Vector Vario v2.01g 16/07/2026
- Improved compass and wind calculation.
- Experimental turbulence estimation.
- Added
BLEFREQ=LOWto reduce BLE static-pressure transmission from 10 Hz to 1 Hz. - Minor bug fixes.
Vector Vario v2.00 09/05/2026
- Stable release validating all changes from the beta builds.
- Improved landing detection.
- Support for successive take-offs and landings.
- IGC logs can be transferred via BLE immediately after landing without restarting the vario.
Vector Vario v2.00e 27/04/2026
- Improved overall vario accuracy and reduced noise.
- Improved wind calculation.
- Improved landing detection.
- Improved GNSS accuracy.
- Fixed a bug when recording GNSS coordinates in IGC files between 0° and 1° south latitude and between 0° and 1° west longitude.
- Fixed a bug where Vector Vario ignored changes to the double- and triple-beep delay in the simulator when playing sounds from the Configurator.
Vector Vario v1.34c 28/03/2026
- Pro models: fixed GNSS position when CSV logging was disabled and IGC logging became active again.
Vector Vario v1.34b 24/03/2026
- More than three additional hours of battery life.
- Improved remaining-capacity estimation.
- GNSS settings refined to remove position latency.
- Improved landing detection.
- Applied a factor of ten to the experimental XCTrack ΔTdew indicator to reveal smaller changes.
Vector Vario v1.33 11/02/2026
- Validation of the additions introduced in v1.33b.
Vector Vario v1.33b 12/01/2026
- Air-temperature inertia compensation for faster response.
- Additional XCTrack fields for displaying the Vector Vario configuration.
- Experimental transmission of theoretical cloud-base altitude to XCTrack.
- Experimental transmission of ΔTd° to explore dew-point variation in thermals and their boundary layer.
- Added
AUTOSHUTOFF=ONto power the vario off after 45 minutes without movement.
Vector Vario v1.32 10/01/2026
- Validation of the additions introduced in v1.32b.
- Improved thermal calibration of airspeed measurements.
- IGC filenames now use UTC date and time.
Vector Vario v1.32b 01/12/2025
- IGC recording now acts as a black box, saving and signing data until the final second.
- Heading, roll and pitch were added to the data recorded every second.
- Corrected harness aerodynamic influence on average airspeed.
- Experimental support for rigid wings, including hang gliders and Swift.
- Added
AIRCRAFT=xfor selecting paraglider, hang glider or Swift algorithms. - Added
LED=xfor LED brightness. - Added
GNSSLED=xfor two- or three-colour GNSS fix feedback. - Added
BLECHECK=xto enable or disable the four-click BLE confirmation. - Pro model: fast triple beep confirms that Pro logging started correctly.
- The LED is white during clicks so it remains distinct from GNSS orange.
- The power long press was reduced to two seconds.
- XCTrack can display roll and pitch in External Data fields 5 and 6.
This release requires Vector Vario Configurator to be reinstalled:
- In a browser, clear its cache and reload the page.
- If installed as an app, uninstall it with its data, then reinstall it.
Vector Vario v1.31 02/11/2025
- Improved TEK vario quality.
- Introduced BLE installation of beta or older firmware releases.
- Startup and shutdown long presses changed from two to three seconds.
Vector Vario v1.29c 22/10/2025
- Fixed the barometric-altitude value sent via BLE.
Vector Vario v1.29b 17/10/2025
- Heading and wind calculation no longer depend on compass measurement.
- Fixed the maximum relative-humidity value in IGC logs.
- Fixed southern- and western-hemisphere coordinates in IGC logs.
Vector Vario v1.28 10/10/2025
- Fixed a GPS setting that underestimated airspeed and wind in tight turns.
- Corrected total-energy compensation during specific flight phases.
Vector Vario v1.27 06/10/2025
- Removed magnetic interference from the TEK vario calculation.
- Improved resilience to brief magnetic disturbances.
- Increased TEK vario accuracy.
- Reduced the aerodynamic effect of an arm on TAS measurement.
- Improved wind calculation.
- Fixed empty IGC files after long flights.
- IGC recording starts at take-off, including the preceding 30 seconds of data.
- Improved SD card recording robustness.
- IGC+ data are recorded at 1 Hz by default.
- Added creation and modification dates to IGC file properties.
- Adjusted sound priorities when moving from a silent zone to an audible zone.
- Added the BLE Device Information Service.
- Reduced BLE static-pressure transmission from 10 Hz to 2 Hz to prevent data loss with some phones.
- Other minor improvements.
Vector Vario v1.26 24/09/2025
- Raw IAS is now stored in IGC files.
- A sound cycle always completes even if the active zone changes.
Vector Vario v1.25 12/09/2025
- Improved robustness against magnetic disturbances caused by the pilot.
- Faster convergence of wind calculation after take-off.
- Other minor algorithm improvements.
- GNSS warm start.
- Added the option to define a sound profile based entirely on the curve.
- Corrected the hemispheres recorded in the IGC log.
- Corrected the reported wing type and identifier.
- More responsive compass, ground wind and glide ratio in the Configurator.
- Calculated IAS and load factor are sent to XCTrack.
- Other minor fixes.
Vector Vario v1.24 24/08/2025
- More accurate TAS on the ground and early in flight.
- IGC filenames aligned with the FAI standard.
Vector Vario v1.23 22/08/2025
- IGC+ logging fixes.
Vector Vario v1.22 21/08/2025
- IGC+ logging fixes.
Vector Vario v1.21 20/08/2025
- IGC log validated by XContest, with CIVL validation still pending.
- Added Netto to IGC+ logs.
- Minor bug fixes.
Update the Vector Vario Configurator
When an internet connection is available, Vector Vario Configurator is updated automatically in the background. The update takes effect after the next restart or page reload. Configurator cannot be rolled back to an older version.
I’m having problems with the Configurator
Which browser should I use?
On Windows, macOS or Android, we recommend Google Chrome, Brave or Microsoft Edge. Configurator can be used online or installed as an app.
On iPhone, use BLE Link to access Configurator online. It cannot currently be installed as an app.
I can’t connect Vector Vario
Watch the Configurator video in the getting-started guide. Do not pair Vector Vario in your device’s Bluetooth settings; connect it directly from Configurator.
The option to connect a BLE device is missing
Web Bluetooth may not be enabled by default:
- Enter
chrome://flags,brave://flagsoredge://flagsin the address bar. - Find Web Bluetooth API and enable it.
- Restart the browser.
The page is still not displayed correctly
Reload it or clear the cache of the browser used to access Configurator, including the browser from which it was installed as an app.
How can I find my Configurator version?
Open Configurator and go to Additional Settings → Information About Configurator → Version.
What is the latest Configurator version?
VVC20260716T120122Z
Version history
Configurator changes are frequent and automatic, so only the most important improvements are listed.
Vector Vario Configurator 05/06/2026
- Redesigned and expanded the Help section.
- Fixed the import of
config.vvfiles containing multiple configurations or glider profiles.
Vector Vario Configurator 27/04/2026
- Added an option to disable automatic configuration import on connection.
- Added flight statistics during transfer from the vario and in IGC import tools.
- Other minor improvements.
Vector Vario Configurator 10/01/2026
- Direct upload of a downloaded track to SportsTrackLive.
- Immediate IGC-to-KML or CSV conversion after download.
Vector Vario Configurator 02/11/2025
- Resolved the iPhone BLE Link compatibility issue.
- Three clicks on the Configurator title show or hide the extra-command field in Additional Settings.
- Smoother and faster updates.
- Installation of different Vector Vario firmware versions via BLE.
- Fixed a critical offline issue when Configurator is installed as an app.
Update the Vector Vario Analyzer
Download the latest release from the Vector Vario Analyzer page.
For other questions, use the dedicated Vector Vario Analyzer Discord channel.
How can I find the version I am using?
You can identify the installed version in several ways:
- read the software window title;
- open Help → About;
- check the list of installed applications on your computer.
How do I update Vector Vario Analyzer?
- Uninstall the software with its uninstaller.
- Install the new version from the newly downloaded file.
Note: imported files and their analyses are preserved.
Version history
Vector Vario Analyzer v0.05 22/09/2026
- Added colour mapping to the Skew-T diagram.
- Added DEM support for ground level and AGL altitude.
- Fixed bugs affecting file imports.
Vector Vario Analyzer v0.04 17/07/2026
- Turbulence display for IGC+ files recorded by Vector Vario firmware v2.01g or later.
- Selection of the folder used to archive imported flights.
- Various improvements.
Vector Vario Analyzer v0.03 16/06/2026
- New Dynamics tab with a 3D view of the glider during flight.
- Automatic sorting for selected lists and tables.
- Independent horizontal and vertical unit settings.
- Automatic scaling disabled when changing the 2D map palette.
- Other minor fixes.
Vector Vario Analyzer v0.02 11/05/2026
- Fixed imports for flights recorded in the Southern or Western Hemisphere.
- Fixed imports for tracks that lost GPS fix during flight.
- Minor improvements and bug fixes.