INSTRUMENTS

Vector Probe

A probe attached to the suspension lines, used by designers and test pilots to measure flight speed and aerodynamic glide ratio accurately.

Red and black Vector Probe
The reference measurement

The reference for designers, test pilots and Vector Vario

Vector Probe is a high-precision probe dedicated to measuring paraglider airspeed and aerodynamic glide ratio. For more than five years, it has supported professionals developing wings and harnesses.

Vector Probe also provided the reference data that made the development of Vector Vario possible.

Wind-tunnel calibration

Measurement accuracy

Each probe is individually calibrated in a wind tunnel.

Glide-ratio accuracy: ±0.2 at a glide ratio of 10 (±0.1° in glide angle)

Airspeed accuracy:

VersionThermal calibration25 km/h35 km/h45 km/h55 km/h65 km/h
Vector VarioNo4.43.53.13.02.9
Vector VarioYes1.31.31.41.51.6
Vector Vario ProYes1.00.80.70.70.6
Vector ProbeYes0.10.20.20.30.3
Installation

Attachment to the suspension lines

The probe attaches to an A-line in the suspension lines, approximately 2 m above the pilot. Installation is quick and requires no tools.

Vector Probe attached to the suspension lines below the paraglider wing
Working with the data

Analyzer

The probe comes with software for extracting the speed polar and comparing it with previous measurements. All data remain stored locally to preserve their confidentiality.

Analyzer software interface: comparing airspeed and glide-ratio measurements
For professionals

Rental and support

Vector Probe is a high-precision measuring instrument that may need recalibration, particularly after an impact during use or if its sensors drift. It is therefore available exclusively for rental.

This arrangement includes the probe and software, together with support for using the instrument and extracting the data.

Contact us to find out more.